Victron Argofet 200-3 Three batteries 200A Retail ARG200301020R

SKU: 104230
No reviews

The Argofet 200-3 is a retail FET battery isolator designed for use in charging systems with up to three batteries from a single alternator or output battery charger.

It allows simultaneous charging of the batteries without connecting them together, preventing discharging of accessory batteries when the starter battery is discharged.

In contrast with diode battery isolators, the Argofet 200-3 has virtually no voltage loss, with a voltage drop of less than 0.02 Volt at low current and averages 0.1 Volt at higher currents.

It also features a special current-limited energize input for the alternator that powers the B+ terminal when the engine run/stop switch is closed.

Price:
Sale price£125.09 GBP

Tax included Shipping calculated at checkout

Stock:
Sold out

We have a Nationwide Price Promise.

If you have found this product cheaper, we will be happy to match the price! Using the buttons below, you can either Match Now, or you can continue with your order and we will match after you have completed your purchase.

More information on our Nationwide Price Promise can be found here: Nationwide Price Promise

Price Match NowPrice Match Later

Argofet 200-3 Three batteries 200A Retail

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section.

Example: When a current of 100 A flows through a cable of 50 mm2 cross section (AWG 0) and 10 m length (30 ft), the voltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm2 cross section (AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0,35 Volt!

Alternator energize input

Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new Argofet isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed.

Important Notice:

Please note that the images of the product shown above are for illustrative purposes only.

While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer.

We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product.

If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270.

At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you.

Thank you for choosing Batteries and Solar for your purchase.

Key Features
  • Virtually no voltage loss
  • Current-limited energize input for alternator
  • Suitable for 200A charging systems
  • Ideal for systems with three batteries
  • Prevents auxiliary batteries from discharging
Specifications
Brand

Victron Energy

Manufacturer Part Number

ARG200301020R

Maximum Charge Current (A)

200

Maximum Alternator Current (A)

200

Number Of Batteries

3

Connection

M8 Bolts

Dimensions

H65 x W120 x D200mm

Weight (kg)

1.4

Warranty

5 Years

Country of Manufacture

India

 

Attachments

Data Sheet

Shipping and Returns

-Standard delivery to UK mainland from £9.00 (3-5 days service).
Restrictions apply*

- Some products may incur an additional Pallet Delivery charge where a palletised delivery is required.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed