Victron Smart BatteryProtect 12/24V-220A BPR122022000

Save £18.29
SKU: 104759
No reviews

Price:
Sale price£104.54 GBP Regular price£122.83 GBP
Stock:
In stock (4 units), ready to be shipped

We have a Nationwide Price Promise.

If you have found this product cheaper, we will be happy to match the price! Using the buttons below, you can either Match Now, or you can continue with your order and we will match after you have completed your purchase.

More information on our Nationwide Price Promise can be found here: Nationwide Price Promise

Price Match NowPrice Match Later

The Smart BatteryProtect 12/24V 200A disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin.

If required, Bluetooth can be disabled.

The Smart BatteryProtect 12/24V 200A is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.

Features of the Battery Protect 12/24V 200A

Protects the battery against excessive discharge and can be used as a system on/off switch
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
The on/off input can be used as a system on/off switch.

12/24V auto ranging
The Smart BatteryProtect 12/24V 200A automatically detects system voltage one time only.

Bluetooth: programming made easy
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin.
If required, Bluetooth can be disabled.

Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16.3V respectively 32.6V.

Ignition proof
No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds.
Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

A special setting for Li-ion batteries
In this mode the Smart BatteryProtect 12/24V 200A can be controlled by the VE.Bus BMS.

Ultra-low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown.

Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the battery voltage drops below the preset level. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Monitor, operate & control your system

Use the VictronConnect app to configure, monitor, update and diagnose your Smart BatteryProtect. It can connect to Victron products via Bluetooth, USB and WiFi/LAN/Internet.

Technical Specifications
Brand

Victron Energy

Manufacturer Part Number

BPR122022000

GTIN

8719076041269

Voltage

12/24V

Max. Continuous Load Current

200A

Peak Current (During 30 Seconds)

600A

Operating Voltage Range

6 –35V

Alarm Output Delay

12 seconds

Max. Load on Alarm Output

50 mA

Load Disconnect Delay

90 seconds

Load Reconnect Delay

30 seconds

Protection Category

Electronics: IP67 (potted), Connections: IP00

Connection

M8

Mounting Torque

9 Nm

Bluetooth Enabled

Yes

Dimensions

H62 x W123 x D120mm

Weight

0.8Kg

Warranty

5 Years

Country of Manufacture

India

 

Data Sheets

Data Sheet

Product Manual

 

Shipping and Returns

-Standard delivery to UK mainland from £9.00 (3-5 days service).
Restrictions apply*

- Worldwide delivery available for items not exceeding 30Kg.

- Some products may incur an additional Pallet Delivery charge where a palletised delivery is required.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed